|
|
1051/1052
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
For Electrical and Electronic Troubleshootings
|
|
•
|
High Accuracy, High Performance and Reliable Measurements
|
|
•
|
Safety design for industrial use
|
|
•
|
Reliable support for data management (Only for KEW 1052)
|
|
|
|
|
|
- VCHEK LoZ low impedance measurement function allows for simultaneous voltage or continuity testing
- A large backlit display provides easy visibility in low-lit areas
- True-rms ac for accurate measurements on non-linear loads
- Record signal fluctuations using the Min/Max function
- Integral holster with probe holders for easy storage
- Auto and Manual ranging
- Meets measurements category CAT III 600V and CAT IV 300V standards for a higher level of safety
- The optional TPAK magnetic hanger allows the user hands-free Flexibility
- Ideal for Utility Linesmen and Line Electricians
- Great for:
- Revenue meter tests (for meter sets and re-connects)
- Capacitor checks
- Absence of presence of voltage
- Continuity, connections, or basic wiring checks
- Electrical testing where ghost voltage may be present
|
|
|
1061/1062
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
High Preformance Handheld DMMs
|
|
•
|
High Accuracy, High Performance and Reliable Measurements
|
|
•
|
Safety design for industrial use
|
|
•
|
Reliable support for data management
|
|
|
|
|
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5, 87-5/E2 Kit)
- True-rms ac voltage and current for accurate measurements on non linear signals (87-5, 87-5/E2 Kit)
- Built in thermometer (87-5, 87-5/E2 Kit)
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 uF capacitance range
- Frequency to 200 kHz and % duty cycle
- Peak capture to record transients as fast as 250 μs (87-5, 87-5/E2 Kit)
- 4½ digit mode (87-5, 87-5/E2 Kit)
- Intrinsically Safe Model 87-5 EX available also.
|
|
|
1012
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
True RMS can measure and indicate distorted waveforms
|
|
•
|
6040 counts with Bar Graph display
|
|
•
|
MIN/MAX function enables to record min & max value
|
|
•
|
REL(relative value) function to indicate the measurement variation
|
|
•
|
DUTY function
|
|
•
|
Data Hold function, Auto Power Off function
|
|
•
|
Continuity with buzzer and Diode Check function
|
|
•
|
Capacity measurement of capacitors
|
|
•
|
Current ranges are protected by fuses
|
|
•
|
Designed to meet international safety standards
IEC61010-1 CAT.III 300V / CAT.II 600V
|
|
|
|
|
- Measure up to 1000 V AC and DC
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 uF capacitance range
- Frequency to 200 kHz and % duty cycle
|
|
|
1011
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
Temperature measurement, selectable for ºC and ºF
|
|
•
|
6040 counts with Bar Graph display
|
|
•
|
MIN/MAX function enables to record min & max value
|
|
•
|
REL(relative value) function to indicate the measurement variation
|
|
•
|
DUTY function
|
|
•
|
Data Hold function, Auto Power Off function
|
|
•
|
Continuity with buzzer and Diode Check function
|
|
•
|
Capacity measurement of capacitors
|
|
•
|
Current ranges are protected by fuses
|
|
•
|
Designed to meet international safety standards
IEC61010-1 CAT.III 300V / CAT.II 600V
|
|
|
|
|
- Continuity Beeper
- Fused Current Inputs - 73, 77
- 0.3% basic accuracy
- 3200 count resolution
- Digital display with analog bargraph
- Manual and automatic ranging
- Automatic Touch Hold
- Resistance, continuity and diode measurements
- Ergonomic case with integrated protective holster (77-4 Only)
- "Classic" design with removable holster (73 III Only)
- Sleep mode preserves battery life
- Lifetime warranty
- IEC 1010 Rating
- 73-3 - 600V CAT II
- 77-4 - 600V CAT III & 1000V CATII
|
|
|
1018/1018H
|
|
|
|
 Selection Guide
|
|
|
|
|
|
|
•
|
Display : 4000 counts.
|
|
•
|
Auto range.
|
|
•
|
Diode test feature.
|
|
•
|
Capacitance test feature.
|
|
•
|
Continuity test.
|
|
•
|
Automatically turns power off in about 15 minutes to conserve battery life.
|
|
•
|
Designed to international safety standard IEC61010-1 CAT.III 300V.
|
|
|
|
|
- For the first time, work in two places at once
- Measures up to 1000 V ac and dc and up to 10 A (20 A)
- 10,000 μF capacitance range and measure frequencies to 200 kHz
- IP 67 rated for water and dust resistance
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Captures peak min/max
- Provides min/max and average readings to capture variations automatically
- For the economical version, look into the Fluke 27 II Rugged IP 67 Industrial Digital Multimeter
|
|
|
1030
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
Compact in Size, Light in Weight and Simple in Use.
|
|
•
|
Double moulding provides comfortable and good feeling in hand.
|
|
•
|
Penlight illuminates brightly the point to be measured, even in dark place.
|
|
•
|
Backlight LCD is highly visible, even in darkness.
|
|
•
|
Auto power-off function saves the battery life.
|
|
•
|
Unique wrapping mechanism for test lead in the rear side compartment.
|
|
•
|
Unique protection mechanism for the test prod for safety.
|
|
•
|
All ranges including Ohm range are protected against overload voltage of 600V.
|
|
•
|
Designed in conformity with International safety standards IEC61010-1:2001 CAT.III 600V.
|
|
|
|
|
- For the first time, work in two places at once
- Measures up to 1000 V ac and dc and up to 10 A (20 A)
- 10,000 μF capacitance range and measure frequencies to 200 kHz
- IP 67 rated for water and dust resistance
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
- Captures peak min/max
- Provides min/max and average readings to capture variations automatically
- For superior accuracy and durability, use the Fluke 28 II True-RMS Rugged IP 67 Industrial Digital Multimeter
|
|
|
KEW MATE 2001
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
Capable of measuring AC and DC currents up to 100A with OPEN CLAMP SENSOR.
|
|
•
|
3400 counts with bargraph display.
|
|
•
|
Pocket size and heavy duty design.
|
|
•
|
Sleep function to save battery consumption.
|
|
•
|
Designed to international safety standard IEC61010-1 CAT.III 300V
|
|
|
|
|
Fluke 289 and Fluke 289/FVF
TRMS Industrial Logging Digital Multimeter
with TrendCapture |
|
|
KEW MATE 2000
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
Capable of measuring AC and DC currents up to 60A with OPEN CLAMP SENSOR.
|
|
•
|
3400 counts with bargraph display.
|
|
•
|
Pocket size and heavy duty design.
|
|
•
|
Sleep function to save battery consumption.
|
|
•
|
Designed to international safety standard IEC61010-1 CAT.III 300V
|
|
|
|
|
Fluke 287
TRMS Industrial Logging Digital Multimeter
with TrendCapture
|
|
|
1009
|
|
|
|
 Selection Guide
|
|
 Product Catalogue
|
|
|
|
|
|
|
•
|
Display : 4000 counts.
|
|
•
|
Auto range and manual range selector provided. (with range hold feature)
|
|
•
|
Diode test feature.
|
|
•
|
Capacitance test feature.
|
|
•
|
Relative measurement.
|
|
•
|
Resistance range provides audible continuity test.
|
|
•
|
Automatically turns power off in about 30 minutes to conserve battery life.
|
|
•
|
Direct current measurement up to 10A AC and DC.
|
|
•
|
With Holster.
|
|
•
|
Designed to international safety standard IEC61010-1 CAT.III 300V.
|
|
|
|
|
- 6000 Count Display Provides Better Resolution
- 0.09% Basic DC Accuracy (Fluke 177 & Fluke 179)
- True-rms AC Voltage and Current Measurement for Accurate Readings on all Waveforms
- Min/Max/Average Records Irregular Activity
- Auto and Manual Hold
- Frequency, Capacitance and Resistance Capabilities
- Fluke 177 and Fluke 179 Have a Backlight to Illuminate the Screen in Dark Workspaces
- The Fluke 179 Measures Temperature in °C and °F (Thermocouple Included)
- IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings
|
|
- VoltAlert™ technology for non-contact voltage detection
- AutoVolt automatic ac/dc voltage selection
- LoZ: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True-rms for accurate measurements on non-linear loads
- Measures 20 A (30 seconds momentary; 10 A continuous)
- Resistance, continuity, frequency and capacitance
- Min/Max/Average to record signal fluctuations
- Compatible with optional magnetic hanger (ToolPak™) for hands free operation
- CAT III 600 V safety rated
|
|
- Built in thermometer for HVAC applications
- Microamps to test flame sensors
- LoZ: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™)
- CAT III 600 V safety rated
|
|
- Resistance, continuity, frequency, capacitance, and diode test
- Measures 20 A (30 seconds momentary; 10 A continuous)
- Large white LED backlight to work in poorly lit areas
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™)
- True-rms for accurate measurements on non-linear loads
- Min/Max/Average with elapsed time to record signal fluctuations
- CAT III 600 V safety rated
|
|
- AutoVolt: automatic AC/DC voltage selection
- Large white LED backlight to work in poorly lit areas
- Resistance and continuity
- Min/Max/Average to record signal fluctuations
- CAT III 600 V safety rated
The Fluke 114 is the troubleshooting tool for "go/no-go" testing. It includes a feature to prevent false readings caused by ghost voltage. |
|
- Operates very similar to the classic Fluke 88
- More problem solving power, safety, convenience and impact protection
- Automotive test functions including DC and AC voltage, resistance and current.
- Advanced functions include conductance, duty cycle, frequency and pulse width to test virtually any circuit
- Flight recorder function that records minimum, maximum and average values, capturing and stores intermittent readings
- Min Max Recording
- built-in thermometer designed to measure and monitor air, surface or immersion temperatures
- Measure current up to 10 amps continuous or 20 amps for up to 30 seconds
- Coil test function that uses conductance to find shorts between DIS coil primary and secondary windings
- Lifetime Warranty
|
|
|
|
|
|
