Features:
·  Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables
·  TIA/EIA standard wiring pair verification
·  Detects shorts, opens, reversed polarity, crossed and split pairs
·  Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting
·  Tracing modes can be adjusted for high performance LAN cables
·  Complete set of connector types standard (telephone, LAN and coax)
·  Nested remote allows end-to-end testing of all wiring types
·  Simple testing of LAN wiring and phone lines
·  Detection of common wiring and connector errors
·  Warning of hazardous voltages
·  Checks for reversed telephone wires

• Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test
  all category UTP cables and hardware.
• Verify end-to-end connectivity per EIA/TIA 568 wiring standard.
• Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair).
• Locates wiring/connection errors (distance to the open or shout)
• Measures cable length

NAN004  Cable Expert™ (Model No.: CE-1000) is the all-in-one and easy-to-use network qualification unit measuring logical network performance and physical condition of network cables. It allows network engineers to install and maintain efficiently local area networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet protocol.
For measuring logical network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic and static configuration protocol and the IP scanning to show the information on all the terminals connected into the local network. It can also evaluate the capability of link partners such as supported network speed (10BASE-T or 100BASE-TX) and duplexity (half- or full- duplex).