|
- Isolated Input Protection of 350Vp-p between any two inputs.
- Highly accurate thermometer with thermocouple
K, J, E, T, R, S, N, L, U, B, C types.
- 4 input function T1/T2/T3/T4 temperature display.
- Programmable Hi – Lo alarm for 4 inputs.
- Display of MAX, MIN, MAX–MIN and AVG values of 4 inputs.
- Independent Input Setup
(type of thermocouple,Hi – Lo alarm values).
- Memory and Read function (99 sets)
- 512KB auto datalogging capacity.
- USB interface.
|
|
Milli-Ohmmeter
- Best resolution 1μΩ. Accuracy 0.05%
- 5A (120 mΩ) max. test current.
- Manual or Auto Range.(There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.)
- Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement)
- Programmable Hi-Lo alarm with memory of 20 data.
|
|
TES-3096
DC/AC KW CLAMP METER
|
|
- Compact Size
- Trms KW measurement
- AC/DC Current Measurement (AC 600A/DC 600A)
- 600V AC & 600V DC, Ohm/Continuity Beeper
- 600 V AC & 600 V DC. Ohm/Continuity Beeper
- One Touch DCA Zero
|
|
|
Luminous Flux Meter
|
|
- I-V Curve Test for Solar Cell.
- Maximum Solar Power (Pmax) Search by Auto-scan (60V, 6A)
- Maximum Voltage (Vmaxp) at Pmax
- Maximum Current (Imaxp) at Pmax
- Voltage at open circuit (Vopen)
- Current at short circuit (Ishort)
- I-V curve with cursor
- Optional printer (model: 300XP) to hardcopy I-V curve
- Calculation of Efficiency (%)
- Manual single point test
|
|
- Portable Field Printing for Certificate
- Text and Graphics
- Two Selectable Fonts (5*7 and 8*16)
- Programmable text Header and Footer
- Battery and AC Power Adaptor
- RS-232C Interface (Optional RS-232C to USB Bridge)
- Fixed Interval Continuous Printing(5, 30, 60, 300 seconds)
|
|
- 5 Digits LCD Display
- Light Reflex Measurement
- Range 10.00 to 99,999 RPM
- Measuring Distance 50 to 300mm
- Event counter with elapsed time
- RM-1502 optional Contact Adaptor
- Max / Min / Hold : True Average
- Auto Range RPM
- RS-232 Interface for Model RM-1501
- Contact RPM and circumferential velocity measurements in one simple adaptor(RM-1502)
|
|
- Sensitive and Accurate
- Ergonomic and easy-to-use design
- Large 4 digits LCD (Liquid Crystal Display)
- 1.8 meters coiled cable and mounting nut for long extension
- Low power consumption
- Hold/Max/Min/Ave functions
- Build-in low battery indicator
- Smart Auto-Power-Off (10 minutes)
- RS-232C Interface with PC (AVM-303)
- Optional Thermal Printer PROVA 300XP (AVM-303)
|
|
- 94dB and 114dB Sound Calibration at 1KHz
- Accurate and Simple to use
- Fits 1", 1/2" or 1/4" diameter microphone
|
|
- CO 2 : 0 ~ 6,000 ppm range, Diffusion sampling mode.
- Three LCD Display for CO 2 , %RH Humidity and Air Temperature.
- Maintenance free dual wavelength NDIR infrared CO 2 sensor (non-dispersive infrared).
- Continuous or manual data logging (20,000 sets).
- Data hold & Maximum / Minimum with Time stamp.
- Data Memory and READ function.
- Alarm and Time setting.
- RS-232 function / Software.
- Backlight display function.
- Simple and safe to use.
|
|
- Test Condition Without Shutting Down Battery.
- Simultaneously Measure Battery Resistance, Voltage.
- Comparator Function.
- Rates Conditions as Pass, Warning, or Fail.
- Memory and Read Function
- Compact and Lightweight.
- RS232 PC Interface
|
|
- Fast and Easy pH measurement
- Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously
- Logging 99 readings
|
|
- 50 MHz to 3.5 GHz frequency range.
- For isotropic measurements of electromagnetic fields.
- Non-directional (isotropic ) measurement with three-channel measurement probe.
|
|
- Measure % Noise Dose / Exposure Time / Sound Level
- Real time clock with calendar
- RS-232 interface
|
|
- 0.1 ℃/0.2 ℉ Resolution
- -35 ℃ ~ 500℃ (-31 ℉ ~ 932 ℉ )
- Built-in Laser Targeting / Backlight LCD display
- MAX / MIN function
- Data memory and read function
- Dual thermometer and Dual display (1327K)
- Audible and visible alarm (1327/1327K)
- Emissivity adjustable (1327/1327K)
|
|
TES-3095T
3095T TRMS KW Clamp Meter
|
|
- 3-3/4 Digital LCD, 4000 count, Autoranging.
- Trms KW, Current, Voltage measurement.
- AC Current 0.1A to 700A.
- Resistance and Continuity test.
- Data hold & MAX function.
- Pocket size.
- Auto Power off.
|
|
|
- User calibration factor setting function.
- End-mount light sensor.
- Select either W/m2 or Btu / (ft2*h) units
- Data Hold / MAX / AVG modes.
- Data Memory and Read function. (99 sets.)
- Auto Data memory and RS232 interface to PC.
|
|
- Flow (CFM,CMM)
- Instant, Ave, 2/3max Flow Measurement
- Velocity m/s, ft/min, knots, Km/hr, mph
- LCD Dual Display
- ℃ / ℉
|
|
- 4-20mA, 0-20mA, 0-24mA with 1 mA resolution
- 0-100mV with 10 mV resolution
- 0-12V with 1mV resolution
- Thermocouple K, J, E, T Type (1℃, 1℉ resolution)
- Frequency 2 - 50,000Hz
|
|
- Test Condition Without Shutting Down Battery.
- Simultaneously Measure Battery Resistance, Voltage, Current, Temperature.
- Auto-hold and Auto-data storage.
- Comparator Function.
- Rates Conditions as Pass, Warning, or Fail.
- Memory and Read Function
- Compact and Lightweight.
- RS232 PC Interface
|
|
|
With Datalogging/Software
The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices. |
|
- Real-time 1/1-Octave and 1/3-Octave analysis.
- Wide linearity range of 100dB.
- Large display with backlighting.
- Real time clock with calendar.
- Memory max. 10000 records of Lp data.
- RS-232 interface.
|
|
|
 TES-3079K
3Phase Power Clamp
|
|
- Check current draw in motors and compressors.
- Use MAX/MIN/Recording in the temperature mode to assess efficiency.
- Test run/start capacitors.
- Confirm low voltage control signals.
- Measure flame safeguard device current draw.
- Confirm power sources.
|
|
|
- Sensitive for low/high air velocity
- Ergonomic Design
- 0.3~45m/s range
|
|
- Simple & Easy to key-in the exact temperature value you need
- Dual LCD display to show the Reference
Room Temperature at the same time
- Accept 11 different type of Thermocouple
(K, J, E, T, R, S, N, L, U, B, C)
- Auto-Ramp &
 T function
|
|
- Max Hold Function
- Data Hold Function
- Aux output JACKS
- T1-T2 differential measurement
|
|
Without Datalogging/Software
The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices. |
|
- Measure % Noise Dose / Exposure Time / Sound Level
- Real time clock with calendar
- RS-232 interface
|
|
TES-3063/3064
Power AC/DC Clamp Meter
|
|
- True power / Apparent Power / Power Factor
- RS-232 Interface to talk with PC
- Dual display KW + PF, KVA + PF, V+A
- A + Hz, V + Hz
- Datalogging Capacity (4000 Reading)
- Peak/MAX/MIN function
|
|
|
- Sensitive and Accurate
- Ergonomic and easy-to-use design
- Large 4 digits LCD (Liquid Crystal Display)
- 1.8 meters coiled cable and mounting nut for long extension
- Low power consumption
- Hold/Max/Min/Ave functions
- Build-in low battery indicator
- Smart Auto-Power-Off (10 minutes)
- RS-232C Interface with PC
- Optional Thermal Printer PROVA 300XP
- Air temperature measurement
|
|
- 4-20mA, with 1 μ A resolution
- Basic Accuracy 0.025% + 5 μ A
- Auto-Ramp and Easy Step Functions
- 1-100% Input
- 0-20mA, 0-24mA Selectable
- Easy Just-Type-in Number Operation
|
|
- Type "K" Thermocouple Input.
- Switchable Resolution 0.1° / 1 ° .
- With ℃& ℉ switching.
- Max / MIN Function.
- Data Hold Function.
- Flip-up stand.
|
|
- Wide linearity range of 100dB
- 32000 Records Data logging function
- RS-232 interface
- Real time clock with calendar
|
|
PROVA-6601
3Phase Power Clamp
|
|
- AC+DC 2000A,600V Power Factor
- AC+DC 1200KW(1 F )
AC+DC 200KW(3 F )
- AC/DC Auto Detection
- Dual Display V+Hz,
A+V,KW+PF,KVA+KVAR
- PF( 3 F 3W , 3 F 4W 1 F 2W )
|
|
|
- Pt 3916/3926/385 RTD standard.
- 7500 DataLogging capacity. (1317)
- Warning beeper with HI/LO setting.
- Time setting.
- MAX / MIN with TIME, MAX-MIN AVG Hold function.
- ℃ / ℉ / K User-Selective.
- Back - Light LCD display.
- Dual input function T1/T2 temperature display. (1318)
|
|
- Auto ranging
- 0.1dB Resolution
- Range from 30 to 130dB
- A&C Frequency Weighting
- Fast/Slow dynamic characteristic
- 16000 Records Data logging function
- RS-232 interface
|
|
PROVA-6600
3Phase Power Clamp
|
|
- AC/DC Auto Detection.
- Auto range. AC+DC true power, and True RMS AC Voltage and Current
- AC+DC 2000A, AC 600V, DC 800V
- Memory of 4 records.
- DCA/DCW Auto Zero when power clamp powering on.
|
|
|
- Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
- Dual input function T1/T2 temperature display. (1316)
- 7500 DataLogging capacity.
- Warning beeper with HI/LO setting.
- MAX/MIN with TIME, MAX-MIN AVG, HOLD function.
- ℃ / ℉ / K User-Selective.
- Back-Light LCD display.
|
|
- 0.1dB Resolution
- Maximum hold function
- AUX OUTPUT JACKS
|
|
- Highly accurate thermometer with thermocouple K, J, E, T, R, S, N type.
- Dual input function T1/T2 temperature display. (1314)
- Warning beeper with HI/LO setting.
- MAX/MIN with TIME, MAX–MIN AVG, HOLD function.
- ℃ / ℉ / K User-Selective.
- Back-Light LCD display.
|
|
