20 mV to 50 V

Uses M3 screw terminals

Thermocouples:
K, J, E, T, R, S, B, N, W (WRe5-26)

0 to 100%
(the B-530 option is required)

1 channel
Count, Inst., Rpm

1 channel

10ms

20ms

50ms

100ms

1s

Number of usable channels

1

2

5

10

10

Measurement phenomenon

Voltage

O

O

O

O

O

Temperature

O

O

2-screen display

This display format enables comparisons of waveforms for the current data against those for past data. (Y-T display only)

Digital screen

This screen displays measured values as digital values. Statistical calculation results can be displayed simultaneously.

Search screen

When measurements are complete, this screen lets the user search for points at which an alarm was generated or for user-specified values. This makes it especially easy to locate abnormal or other specific values.

10 ms*1

50 ms*2

100 ms

200 ms

500 ms

1 s

10 s

3.5 MB internal
flash memory

Approx.
20 min.

Approx.
2 hrs.

Approx.
4 hrs.

Approx.
8 hrs.

Approx.
20 hrs.

Approx.
1.8 days

Approx.
18 days

256 MB USB
memory stick

Approx.
1 day

Approx.
6 days

Approx.
13 days

Approx.
26 days

Approx.
65 days

Approx.
130 days

Approx.
1300 days

Digital display

Replay Digital display

Item

Description

Number of input channels

Analog : 10 ch, Pulse *1 : 1 ch, Logic *1 : 1 ch

Analog input terminal shape

Screw terminal

Sampling interval

10 ms to 1 h (10 ms to 50 ms are for voltage measurement only, there is a limit to the number of channels)

Measurement method

Scanning method

Measurement range

Voltage

20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50 V, 1-5 V / F.S.

Temperature

Thermocouple : K, J, T, R, S, B, N, W (WRe5-26)

Humidity

0 to 100 % ( when using optional humidity sensor, 0-1 V scaling conversion is used)

Filter

Off, 2, 5, 10, 20, 40 (Moving average with following values isdone)

Measurement accuracy

Voltage

0.1 % of F.S.

Temperature

Thermo couple

Measurement Temperature Range (°C)

Measurement Accuracy

R/S

0 ≤ TS ≤ 100
100 < TS ≤ 300
R : 300 < TS ≤ 1600
S : 300 < TS ≤ 1760
Reference contact compensation accuracy : ±0.5°C

±5.2°C
±3.0°C
±(0.05% of rdg +2.0°C)
±(0.05% of rdg +2.0°C)

B

400 ≤ TS ≤ 600
600 < TS ≤ 1820
Reference contact compensation accuracy : ±0.5°C

±3.5°C
±(0.05% of rdg +2.0°C)

K

-200 ≤ TS ≤ -100
-100 < TS ≤ 1370
Reference contact compensation accuracy : ±0.5°C

±(0.05% of rdg +2.0°C)
±(0.05% of rdg +1.0°C)

E

-200 ≤ TS ≤ -100
-100 ≤ TS ≤ 800
Reference contact compensation accuracy : ±0.5°C

±(0.05% of rdg +2.0°C)
±(0.05% of rdg +1.0°C)

T

-200 ≤T≤ -100
-100 < TS ≤ 400
Reference contact compensation accuracy : ±0.5°C

±(0.1% of rdg +1.5°C)
±(0.1% of rdg +0.5°C)

J

-200 ≤ TS ≤ -100
-100 < TS ≤ 100
100 < TS ≤ 1100
Reference contact compensation accuracy : ±0.5°C

±2.7°C
±1.7°C
±(0.05% of rdg +1.0°C)

N

0 ≤ TS ≤ 1300
Reference contact compensation accuracy : ±0.5°C

±(0.1% of rdg +1.0°C)

W

0 ≤ TS ≤ 2315
Reference contact compensation accuracy : ±0.5°C

±(0.1% of rdg +1.5°C)

Reference contact compensation

Internal/External switching

A/D converter

16 bits (out of which 14 are internally acknowledged)

Trigger Functions

Trigger types

Start: Data capture starts when a trigger is generated.

Stop: Data capture stops when a trigger is generated.

Trigger conditions

Start: Off, Level *2, External, Time

Stop: Off, Level *2, External, Time, Specified period of time

Alarm functions

Type

Analog, Logic or Pulse; OR logic

Condition*2

Analog: Rising, Falling, Window In, Window Out

Pulse: Rising, Falling, Window In, Window Out

Logic: Rising, Falling

Pulse input mode

Count mode

Displays a count of the number of pulses for each sampling interval from the start of measurement

Inst mode

Counts the number of pulses for each sampling interval. Resets the count value after each sampling interval.

RPM mode

Counts the number of pulses per second; enables them to be converted to rpms.

Pulse input range

Count mode

50 c, 500 c, 5000 c, 50 kc, 500 kc, 5 Mc, 50 Mc, 500 Mc

Inst mode

50 c, 500 c, 5000 c, 50 kc, 500 kc, 5 Mc, 50 Mc, 500 Mc

RPM mode

50 rpm, 500 rpm, 5000 rpm, 50 krpm, 500 krpm, 5 Mrpm, 50 Mrpm, 500 Mrpm

Alarm output

Number of channels

1 ch

Output type

Open collector output (100 kΩ pull-up resistance)

Output conditions

Level judgment, window judgment, logic pattern judgment, pulse judgment

External trigger input*1

1 ch

PC I/F

USB

Data storage functions

Measurement data

Direct capture to the internal flash memory or USB memory stick

Other

Setting parameters and screen copy data can also be saved

Memory devices

GL200A internal flash memory (3.5 Mbytes), USB memory stick

Calculation functions

Statistical calculation: Average value, Peak value, Maximum value, Minimum value, RMS

Search function

Search for analog signal levels or alarm generation points in captured data

Search types

Analog signal

Rising or falling with respect to the specified level

Alarm

Both, Rising, Falling

Scaling conversion function

Input (upper and lower limits) and output (upper and lower limits) can be set for each channel

Display unit

Size: 3.5-inch TFT color LCD; Display information: Waveforms + digital values, waveforms only, digital values only

Maximum permissible input voltage

Between +/- terminals: 60 Vp-p
Between input terminals and casing: 60 Vp-p

Withstand voltage

Between each input channel and main unit chassis, and also between each CHs: 1 minute at 350 Vp-p

Operating environment

0 to 40°C, 30 to 80% RH

Power supply

AC adapter: 100 to 240 VAC, 50/60 Hz
DC input: 8.5 to 24 VDC *3
Battery pack (option) *3

Power consumption

28 VA or lower (when the AC drive is used)

External dimensions (W x D x H) (approx.)

194 x 122 x 41 mm

Weight (approx.)

480 g (excluding AC adapter and battery)

Item

Description

CPU

Pentium 4, 1.7 GHz or more

Memory

At least 512MB (1 GB recommended)

Supported OS

Windows 2000, Windows XP, Windows Vista

Functions

GL200A control, real-time data capture, file format conversion

GL200A setting range

Input settings, memory settings, alarm settings, trigger settings

Captured data

Real-time transfer to a PC, transfer of data from the GL200A’ s internal memory

Display information

Analog waveforms, logic waveforms, pulse waveforms, digital values

Display modes

Digital values, waveforms

Monitoring function

An email is sent to a specified email address when an alarm is generated

File format conversion

Conversion of data between cursors or all data to the CSV format

Direct to Excel

Saves sampling data up to 100 ms to an Excel file

Maximum/minimum

Displays the maximum, minimum, and current values during measurement

Product name

Model name

Remarks

Logic alarm cable

B-513

2 m

DC drive cable

B-514

2 m

Battery pack

B-517

1 piece

Humidity sensor*4

B-530

3 m

Rod-shaped K-type thermocouple

RIC-410

1.1 m

K-type thermocouple for static surfaces

RIC-420

1.1 m

L-shaped K-type thermocouple for static surfaces

RIC-430

1.1 m

Battery pack
(B-517)

Logic alarm cable
(B-513)

DC drive cable
(B-514)

Humidity sensor
(B-530)

Rod-shaped K-type
thermocouple
(RIC-410)

K-type thermocouple
for static surfaces
(RIC-420)

L-shaped K-type thermocouple
for static surfaces
(RIC-430)