|
BW GasAlertMicroClip for combustible gases (methane, propane, etc)
- Single gas LEL/combustible gas detector
- Built-in datalogging & event logging
- IP66/67 rating for moisture/dirt protection
- Rechargeable battery pack for longer battery life
- Compatible with SamplerPak pump for remote sampling
The GasAlertMicroClip LEL gas monitor from BW Technologies is a personal gas detector that monitors for a broad range of combustible gases, including methane, propane, butane, natural gas and others.
The continuous LCD shows simultaneous gas concentrations from 0-100% LEL (lower explosive limit, the standard way of monitoring the concentration of combustible gases).
Alarming provides 95 dB alarm tone and bright wide-angled alarm bars and has an internal vibrating alarm for high noise areas. LCD Backlight: in alarm (auto) and on demand reactivation.
The unit is powered by a lithium polymer battery with a typical run time of 14 hours. Recharge time is less than 3 hours.
The unit is compatible with the MicroDock II automated docking test and calibration station. The monitor can also be purchased as part of a confined space kit which includes the combustible monitor, plus calibration gas, calibration accessories, flow regulator, hoses and tubing all bundled together in a convenient carry case.
The GasAlertMicroClip LEL combustible gas monitor is housed in a rugged, highly water resistant IP66/67 housing with built-in concussion-proof boot. Other features include an extra-loud audible alarm, flashing LED light bars and built-in vibrating alarm.
- Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
- Simple one-button operation
- Standard datalogger (16 hours) and eventlogger (10 events)
- Durable, stainless steel alligator clip
- Integral concussion-proof boot for the most rugged environments
- Continuous LCD shows continues 0-100% LEL or 0-5.0% Methane reading
- Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
- Provides 95 dB alarm tone and bright wide-angled alarm bars
- Equipped with internal vibrating alarm for high noise areas
- Backlight: in alarm (auto) and on demand reactivation
- Instant Low and High Alarm
- Simple automatic calibration procedure
- Fully compatible with BW's MicroDock II automatic test and calibration system
- User selectable options include: confidence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
- Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
- Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions
|
Combustible measure range (methane, propane, butane, natural gas, etc)
|
0-100% LEL or
0-5% by vol. methane
|
|
Auto zero
|
Yes
|
|
Calibration
|
Automatic
|
|
Backlight
|
Low light (auto); alarm condition (auto); reactivation on demand
|
|
Full function self-test
|
Sensor integrity, circuitry and battery; audible/visual alarms
|
|
Sensor
|
Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
|
|
User field options
|
Confidence beep, pass code protection, latching alarms, calibration due date, “SAFE” display function
|
| |
|
ALARM INDICATORS
|
Clearly advises alarm levels both visually and audibly
|
|
Visual alarms
|
Two flashing alarm bars visable from all angles
|
|
LCD indicates gas present and alarm levels encountered
|
|
|
Audible alarm
|
Typically 95 dB at 30 cm variable pulsed audible alarm
|
|
Vibrator alarm
|
Pulses warning in gas alarm conditions, or for any status alarms
|
|
Other
|
Low battery, over range, multiple gas and missing sensor
|
| |
|
ALARM LEVELS
|
Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
|
| |
TWA (time weighted average) and STEL (short term exposure limit) for H2S and/or CO; OL (over limit alarm) for combustible gases
|
|
LCD
|
Continuous, alphanumeric gas readout and status display advises:
|
|
Gases monitored
|
H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)
|
|
Gas concentration
|
Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)
|
|
TWA ppm or %
|
Records STEL and TWA exposures and displays on demand
|
|
Peak ppm or %
|
Records and displays peak exposure to gas and displays on demand
|
|
Alarm setpoints
|
Displayed on activation
|
| |
|
TESTS:
|
|
|
Full function self-test
|
Full function self-test on activation
|
|
Battery
|
Continuous
|
| |
|
GENERAL SPECIFICATIONS
|
Rugged, composite material with integral concussion-proof boot
|
|
Operating temperature
|
-4 to 122 oF / -20 to 50 oC
|
|
Humidity
|
5% to 95% RH (non-condensing)
|
| |
|
EMI/RFI
|
Complies with EMC Directive 89/336/EEC
|
|
Ingress Protection
|
IP65
|
|
Battery run-time
|
16-18 hours on two AA alkaline cells / 14-16 hours on two NiMH rechargeable cells
|
|
Size
|
2.4 x 4 x 1.3 in. / 6 x 10 x 3.3 cm
|
|
Weight
|
7.4 oz. / 211 g
|
| |
|
WARRANTY
|
Full 2 year warranty including all sensors
|
| |
|
DATALOGGER OPTIONS
|
User-downloadable datalogger
|
|
Data recorder
|
All events and occurrences
|
|
Sampling rate
|
Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
|
|
Storage
|
4.4 months of continuous data via 32 MB Flash MMC card (64 MB cards are also available); when full, the wraparound feature replaces oldest data with most recent data
|
|
